想要讓我們的數控開料機的使用達到它的正常壽命我們就要做好開料鋸的保養問題。很多用戶并不了解怎么保養開料機，這里為您講保養數控開料機的細節和方法：

　　1、除塵。如果灰塵進入到設備內部就很有可能影響到數控開料機的生產效率

　　做好對數控開料機的臺面以及各個部位的除塵工作。一旦灰塵進入到了設備內部，就會對設備造成非常大的困擾，影響設備的正常使用，影響生產效率。所以在日常使用中必須要做好機器臺面以及機殼表面等清潔，做好清潔工作。

　　要對數控開料機做好防銹工作。一旦設備生銹就會一些部件老化等問題，使數控開料機的工作效率降低，所以必須定期對設備進行防銹油的涂抹，以免設備生銹。

　　二、潤滑。

　　有些因為繁忙往往忽視了數控開料機注油的問題，有些是因為季節原因設備好幾天甚至幾不，也不注意設備上油。經驗告訴我們，上油在數控開料機維護過程中起重要作用，正確做法為：

　　1、清理干凈導軌與絲杠，可用布(不脫)把導軌和絲杠上的油漬和材料屑清理掉。

　　2、加油期為每個月兩次，也就是每兩一次油。

　　3、機器若長期不用，應定期加油空走，以保證傳動系統的靈活。

　　4、加完油后慢速來回走動，保證潤滑油能夠均勻加到導軌和絲杠上。

　　保養的過程中還要做好數控開料機傳動裝置的潤滑工作。當在設備運行時，如果設備傳動裝置運行不暢，就會導致設備送料不均勻，影響下料的質量，對工業生產造成一定的影響。所以在日常保養中對設備傳動裝置進行潤滑處理是非常重要的。數控開料機

If we want the use of our CNC cutting machine to reach its normal life, we must do a good job in the maintenance of the cutting saw.Many users don't know how to maintain the cutting machine. Here are the details and methods of maintaining the CNC cutting machine for you.：

　　1. Dust removal.If dust enters the inside of the equipment, it is very likely to affect the production efficiency of the CNC cutting machine.

　　Do a good job of dust removal of the countertops and various parts of the CNC cutting machine.Once the dust enters the interior of the equipment, it will cause great trouble to the equipment, affect the normal use of the equipment, and affect production efficiency.Therefore, in daily use, it is necessary to clean the machine countertop and the surface of the chassis, and to do a good job of cleaning.

　　It is necessary to do a good job of anti-rust work on the CNC cutting machine.Once the equipment rusts, some parts will age and other problems, which will reduce the work efficiency of the CNC cutting machine. Therefore, the equipment must be regularly smeared with anti-rust oil to avoid equipment rust.

　　Second, lubrication.

　　Some often ignore the problem of oiling the CNC cutting machine because they are busy, and some do not pay attention to the oiling of the equipment for several days or even a few days due to seasonal reasons.Experience tells us that oiling plays an important role in the maintenance process of CNC cutting machines. The correct approach is：

　　1. Clean up the guide rail and screw, and use a cloth (without taking off) to clean up the oil stains and material debris on the guide rail and screw.

　　2. The refueling period is twice a month, that is, once every two years.

　　3. If the machine is not used for a long time, it should be refueled and emptied regularly to ensure the flexibility of the transmission system.

　　4. After adding the oil, walk back and forth slowly to ensure that the lubricating oil can be evenly applied to the guide rail and screw.

　　During the maintenance process, the lubrication of the transmission device of the CNC cutting machine must also be done.When the equipment is running, if the transmission device of the equipment is not running smoothly, it will cause uneven feeding of the equipment, affect the quality of the cutting, and have a certain impact on industrial production.Therefore, it is very important to lubricate the transmission device of the equipment in daily maintenance.CNC cutting machine